AC/DC 12V 5A 60W Desktop Switching Power Supply for LED/Printer

12V5A AC/DC desktop power adapterThe power adapter is 60W desktop type adapter series .This product is equipped with a 2-pinC8 power plug,adopting the input range from 100VAC to 240VAC.The entire series suppliesoutput voltage between 5VDC and 48VDC that can satisfy the demands for various types of DCconsumer electronic dev

Featured Products

12V5A AC/DC desktop power adapter

The power adapter is 60W desktop type adapter series .This product is equipped with a 2-pin
C8 power plug,adopting the input range from 100VAC to 240VAC.The entire series supplies
output voltage between 5VDC and 48VDC that can satisfy the demands for various types of DC
consumer electronic devices.The effiency is not lower than 84% and designed accordion to UL/
CE/FCC safty regulations.

Features:
Universal Input 100-240 VAC
2 pin C8 AC inlet
Output with Low Ripple Noise
Efficiency 84%min
Class II power (without earth pin)
Protections:Short circuit/Overload/Over voltage
Fully enclosed plastic case
LED indicator for power on
100% full load burn-in test
CE/FCC and RoHS Certified
Desktop Style / Non-vented Case
Case Dimension (L*W*H mm):110*62*33.5
Modified and Custom Design Available
2 years warranty

Iutput Characteristics
Input Voltage:100~240V AC
Input Voltage Range:90-264VAC
Rated Input Frequency:50Hz or 60Hz single phase.
AC Input Frequency Range:47Hz to 63Hz

Output Characteristics
Rated Voltage:5V~48V optional
Output voltage regulation precision:±5%
Loading regulation:±1%
Ripple :1% Vp-p max.
Transient Response :0.5ms for 50%   Load Change Typical

Protection:
Fold back Overcurrent Protection; Short Circuit Protection

Environmental Conditions
Operating temperature:0ºC~40ºC
Operating humidity:20%~ 90% (Relative humidity).
Storage temperature:-20ºC ~ 70ºC .
Storage humidity:5%~ 95% . (Relative humidity).
Cooling:By natural air flow

Immunity
Dielectric Withstand Voltage ( HI-POT ):HI-POT-A IEC 320 2pin primary to secondary 3000Vac 5mA 1min
Safety Approvals:CE /RoHS Certified and Designed according to UL/ standards

Reliability
MTBF (Mean-Time-Between-Failures) Calculation:MTBF shall be 50K hours of continuous operation at 20ºC, maximum load and normal voltage
MTBF Verification:The MTBF shall be verified from life testing performed by factory Quality Department. The operating conditions are: 40ºC ambient temperature , sea level , both nominal line voltage ranges (230Vac) and a minimum load of 70% of the maximum load.





 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours