Switching power supply professional high power amplifier Fp 10000q

FP14000 Hight Power 2350W*2/8 ohm Amplifier  FP14000 technical parameters 8Ω Stereo Power: 2X2350W 4Ω stereo power: 2X4400W 2Ω stereo power: 2X7000W 8Ω Bridged Power: 8800W 4Ω Bridged Power:14000W  Frequency response (+0 /-0.3dB, 1W/8Ω)

Featured Products


FP14000 Hight Power 2350W*2/8 ohm Amplifier
 
 
FP14000 technical parameters
 
8Ω Stereo Power: 2X2350W
 
4Ω stereo power: 2X4400W
 
2Ω stereo power: 2X7000W
 
8Ω Bridged Power: 8800W
 
4Ω Bridged Power:14000W 
 
Frequency response (+0 /-0.3dB, 1W/8Ω): 20Hz-34KHz 
THD 20 Hz-20 kHz 1W: <0.1% 
SNR:> 112dB 
channel separation (crosstalk) 1 kHz:> 70dB 
input connector: XLR female 
output connectors: Speakon Block 
input impedance: 20KΩ balanced 
level adjustment: Front panel potentiometer, from minus infinity to 0dB 
cooling: variable speed fan, airflow from front to rear 
amplifier protection: short circuit, DC voltage, overheating, RF, ultra-low frequency protection power Specifications: AC 220V (± 10%) 50-60Hz 
chassis size (H * W * L): 88mmX483mm × 396mm 
packing Size (H * W * L): 180mmX560mm × 500mm 


The transisitors are Onsemi transistors.

the resistors are 1% metal film

P+ series Switching Power Amplifier Specification
     
ITEMFP7000FP9000FP14000FP8000QFP10000Q
Output Power20-20kHz, 1W with 1 khz
8ΩStereo Power(RMS)1500WX21800WX22350WX2800WX41350WX4
4ΩStereo Power(RMS)2800WX23000WX24400WX21400WX42100WX4
2ΩStereo Power(RMS)3500WX24500WX27000WX21600WX42500WX4
8ΩBridged Power(RMS)5600W6000W8800W2800WX24200WX2
4ΩBridged Power(RMS)7000W9000W14000W3200WX25000WX2
Frequency Response(+o/-0.3dB,1W/8Ω)20 Hz - 34 kHz
THD 20 Hz - 20 kHz for 1 W<0.1%
Signal-to-Noise Ratio>112 dBA
Channel separation (Crosstalk) at 1 kHz>70 dB
Input Connectors (per channel)3-pin XLR, electronically balanced
Output Connectors (per channel)Binding Posts 2-pole
ClassTD
TourClass ProtectionACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input
Operating voltage, 230 V / 115 V nominal130-265 V / 65-135 V
Voltage Gain(dB)23, 26, 29, 32, 35, 38, 41, 44 dB selectable
Input impedance20 kOhm
Level adjustment (per ch.)Front-panel potentiometer, 31 position detented from -inf to 0 dB
Dimensions (W×H×D)483×88×396mm
Packing dimension560×180×500mm
Net weight(kg)12
Gross weight(kg)15

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours